Titanium Disc
Titanium Discbiasane digunakake kanggo nggawe machined menyang titanium flange utawa Titanium tubesheet kanggo peralatan exchanger panas.
Minangka perusahaan sing duwe pengalaman produksi luwih saka 20 taun, kita duwe seri proses penempaan sing ketat lan manual operasi, kalebu langkah-langkah pemanasan, wektu pemanasan lan wektu pengawetan panas.Mesin tempa cepet 35MN lan 16MN njamin tempa kaping pirang-pirang ing sawetara suhu sing cocog.Lan teknologi forging bisa ngganti struktur fisik cakram titanium.Apik banget kualitas tingkat cakram titanium.
• Material Disc Titanium: Titanium Murni, Kelas 1, Kelas 2, Kelas 5, Kelas 5, Kelas 7, Kelas 9, Kelas 11, Kelas 12, Kelas 16, Kelas 23 dll
• Wangun: Ukuran Standar utawa minangka saben gambar klien.
• Ukuran:OD: 150～1500mm, Ketebalan: 35～250mm, Disesuaikan
• Standar:ASTM B265, ASTM B381
• Inspeksi:Tes komposisi kimia → Tes sifat fisik → Pemeriksaan makroskopik → Deteksi cacat ultrasonik → Inspeksi cacat penampilan
| Titanium Alloys Material Jeneng Umum | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0.20 Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15 Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
♦ Titanium Disc Komposisi kimia ♦
| sasmita | Komposisi kimia, persen bobot (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Unsur liyane Maks.saben | Unsur liyane Maks.gunggung | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.56.75 | 3.5 4.5 | — | — | — | — | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | 0.12 0.25 | — | 0.12 0.25 | — | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 3.5 | 2.0 3.0 | — | — | — | — | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12 0.25 | — | — | — | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04 0.08 | — | — | — | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | — | — | — | — | 0.1 | 0.1 |
♦Titanum DiscSifat Fisik ♦
| sasmita | Sifat fisik | |||||
| Kekuwatan tensile Min | kekuatan ngasilaken Min (0,2%, offset) | Elongation ing 4D Min (%) | Pengurangan Area Min (%) | |||
| ksi | MPa | ksi | MPa | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
♦♦♦ Titanium Alloy Bahan Fitur: ♦♦♦
•Grade 1: Titanium Murni, kekuatan relatif kurang lan ductility dhuwur.
•Grade 2: Titanium murni sing paling akeh digunakake.Kombinasi paling apik saka kekuatan
•Kelas 3: Titanium kekuatan dhuwur, digunakake kanggo piring Matriks ing penukar panas cangkang lan tabung
•Kelas 5: Paduan titanium sing paling akeh diprodhuksi.Kekuwatan sing dhuwur banget.resistance panas dhuwur.
•Kelas 7: Ketahanan korosi sing unggul ing lingkungan sing nyuda lan ngoksidasi.
•Kelas 9: Kekuwatan lan ketahanan korosi sing dhuwur banget.
•Kelas 12: Tahan panas sing luwih apik tinimbang Titanium murni.Aplikasi kanggo Kelas 7 lan Kelas 11.
•Grade 23: Titanium-6Aluminium-4Vanadium ELI (Extra Low Interstitial) Alloy kanggo aplikasi implan bedhah.
