Target Plat Titanium
Titanium Target Kab: Kita nggunakake titanium alloy billet, utawa piring kanggo machined menyang titanium targets.The isi impurity saka titanium murni industri luwih saka titanium murni kimia, supaya kekuatan lan atose rada luwih.Sifat mekanik lan kimia padha karo stainless steel.Dibandhingake karo alloy titanium, titanium murni nduweni kekuatan sing luwih apik lan nduweni resistensi oksidasi sing luwih apik.Iku luwih apik tinimbang austenitic stainless steel, nanging tahan panas kurang.Tambah TA1, TA2, TA3 ing isi impurity, kekuatan mechanical lan atose mundhak ing urutan, nanging kateguhan plastik sudo ing urutan.
• Titanium Plate TargetKelas 1, Kelas 2, Kelas 5, Kelas 5, Kelas 7, Kelas 9, Kelas 11, Kelas 12, Kelas 16, Kelas 23 dll
• Jinis:Target Round, Target Pipa, Target Plate.dll
• Ukuran: 60/80/120(W)×6/8/12(T)×519/525/620(L) &60-800(W)×6-40(T)×600-2000(L)Customized
•Surface:lumahing padhang utawa lumahing pickling Asam
• Aplikasi: digunakake ing piranti pemisahan semikonduktor, tampilan flat-panel, film elektroda panyimpenan, lapisan sputtering, lapisan lumahing workpiece, industri lapisan kaca, etc.
| Titanium Alloys Material Jeneng Umum | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0.20 Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15 Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
♦ Komposisi Kimia Paduan Titanium ♦
| sasmita | Komposisi kimia, persen bobot (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Unsur liyane Maks.saben | Unsur liyane Maks.gunggung | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.56.75 | 3.5 4.5 | — | — | — | — | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | — | — | 0.12 0.25 | — | 0.12 0.25 | — | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 3.5 | 2.0 3.0 | — | — | — | — | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12 0.25 | — | — | — | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04 0.08 | — | — | — | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | — | — | — | — | 0.1 | 0.1 |
♦Titanum Alloy KabSifat Fisik ♦
| sasmita | Sifat fisik | |||||
| Kekuwatan tensile Min | kekuatan ngasilaken Min (0,2%, offset) | Elongation ing 4D Min (%) | Pengurangan Area Min (%) | |||
| ksi | MPa | ksi | MPa | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
