Spring Gelombang Inconel
♦♦♦ Inconel Wave Springs♦♦♦
Wave spring minangka unsur logam elastis kanthi bentuk cincin tipis sing kasusun saka sawetara puncak gelombang lan lembah.Sumber gelombang digunakake akeh ing motor, mesin tekstil, peralatan hidrolik, mobil lan industri liyane.Instalasi utama lan spesifikasi (ukuran nominal) saka kamar bantalan cocok.Utawa ing bolongan, papan instalasi cilik, lan nduweni fungsi khusus kanggo nyuda gangguan lan nyuda geter.
Dhiameter njaba saka 6mm nganti 1000mm.kekandelan saka 0.4mm kanggo 5.0mm.
• High Temperature Spring Materials:
SUS304,SUS316, SUS631/17-7PH, SUS632/15-7Mo, 50CrVA, 30W4Cr2VA,
Inconel X-750,Inconel 718, Nimonic90, Incoloy A286(SUH660)
• Jinis Spring:
→ Compression Springs → Extension spring
→ Torsion Spring → Bending spring
♦ Spring Gelombang ♦ GulungSpring♦ Disc Spring
♦ Spring Ring ♦ Spring Bentuk Khusus, lsp
| Jinis Material | Jeneng Material | Suhu Aplikasi maksimal°C |
| baja tahan karat | SUS304/SUS316 | 200 |
| SUS631/17-7PH | 370 | |
| SUS632/15-7Mo | 470 | |
| Baja paduan spring steel | 50CrVA | 300 |
| 30W4Cr2VA | 500 | |
| Paduan basis nikel suhu dhuwur | Incoloy A286(GH2132) | 600 |
| Inconel X-750(GH4145) | 600 | |
| Inconel 718 (GH4169) | 690 | |
| Nimonic90(GH4090) | 800 (γ＜0.2) | |
| GH4099 | 1000 (γ＜0.1) |
♦♦♦ Disc Springs♦♦♦
Utamane digunakake ing klep, flanges, kopling, rem, konverter torsi, saklar tegangan dhuwur, pengencang bolt, dhukungan pipa, lapangan shockproof lan shockproof.padha diprodhuksi miturut DIN EN16983 (DIN2093).
Dhiameter njaba saka 6mm nganti 1000mm.
Bahan kasebut kalebubaja paduan 51CrV4, baja karbon SK85, 1074;
• Baja tahan karat ASTM301, 304, 316, 17-7PH, 17-4PH, 15-7Mo;
• baja tahan panas H13, X30WCrV53, X22CrMoV12-1, X39CrMo17-1;
• tahan suhu dhuwur stainless steel Inconel X750, Inconel X718, Nimonic 90, etc.
Proteksi karat
- Phosphating
- Galvanizing mekanik
- Dilapisi nikel
- Jiaomei
Dheweke duwe karakteristik deformasi cilik lan beban gedhe.Uga nduweni fitur ing ngisor iki.
- Disc springs bisa entuk karakteristik beban sing beda liwat kombinasi inversi lan tumpang tindih sing beda.
- Dibandhingake karo spring liyane, disc springs njupuk kurang spasi.
- Nalika sawetara sheets digunakake ing kombinasi, efek damping tambah.
- Yen digunakake kanthi wajar, ora bakal deform utawa rusak.
- Urip kesel luwih dawa.
| Bahan Spring | Temp Kerja | Kekuwatan Tensile | Modulus elastis KN//mm2 | Kimia% | ||||||||||||||||||
| °C | N/mm2 | RT°C | 100°C | 200°C | 300°C | 400°C | 500°C | 600°C | C | Si | Mn | P | S | Cr | Ni | liyane | ||||||
| T8A SK85 | -50 kanggo +100 | 1200-1800 | 206 | 202 | - | - | - | - | - | 0.80-0.09 | ≤ 0,35 | ≤ 0,50 | ≤ 0,03 | ≤ 0,03 | ≤ 0,20 | ≤ 0,25 | Cu≤0.30 | |||||
| 50CrV4 SUP10 | -50 kanggo +200 | 1200-1800 | 206 | 202 | 196 | - | - | - | - | 0.47-0.55 | ≤ 0.4 | 0.71.1 | ≤ 0,025 | 0,025 | 0.9 1.2 | ≤ 0.4 | V:0.1 0.25Mo≤ 0.1 | |||||
| C75 | -50 kanggo +100 | 1200-1800 | 206 | 202 | - | - | - | - | - | 0.70-0.80 | 0.15-0.35 | 0.60 0.90 | ≤ 0,025 | 0,025 | ≤ 0.4 | ≤ 0.4 | Mo≤ 0.1 | |||||
| 60Si2Mn SUP6 | -50 kanggo +200 | 1200-1800 | 206 | 202 | 196 | - | - | - | - | 0.56-0.64 | 1.50-2.0 | 0.6 0.9 | ≤ 0,035 | 0.035 | ≤ 0,35 | ≤ 0,35 | ||||||
| X 10CrNi 18-8 SUS301 | -200 kanggo +200 | 1150-1500 | 190 | 186 | 180 | - | - | - | - | 0.05-0.15 | ≤ 2.0 | ≤ 2.0 | ≤ 0,045 | 0.015 | 16.0 19.0 | 6.0 9.5 | Mo≤ 0,08 | |||||
| X 5CrNi 18-10SUS304 | -200 kanggo +200 | 1000-1500 | 185 | 179 | 171 | - | - | - | - | ≤ 0,07 | ≤ 1.0 | ≤ 2.0 | ≤ 0,045 | 0.015 | 17.0 19.5 | 6.0 9.5 | N≤ 0.11 | |||||
| X 5CrNiMo 17-12-2 SUS316 | -200 kanggo +200 | 1000-1500 | 180 | 176 | 171 | - | - | - | - | ≤ 0,07 | ≤ 1.0 | ≤ 2.0 | ≤ 0,045 | 0.015 | 16.5-18.5 | 10.0 13.0 | Mo:2.0-2.5N≤ 0.11 | |||||
| X 7CrNiAl 17-7 SUS631 | -200 kanggo +300 | 1150-1700 | 195 | 190 | 180 | 171 | - | - | - | ≤ 0,09 | ≤ 0,7 | ≤ 1.0 | ≤ 0,04 | 0.015 | 16.0 18.0 | 6.5 7.8 | Al: 0.7-1.5 | |||||
| X5CrNiCuNb 16-4 SUS630 | -200 kanggo +300 | 1150-1700 | 195 | 190 | 180 | 171 | - | - | - | ≤ 0,07 | ≤ 1.0 | ≤ 1.0 | ≤ 0,035 | 0.03 | 15.0 17.0 | 3.0 5.0 | ||||||
| X8CrNiMoAl 15-7-2 | -200 kanggo +300 | 1150-1700 | 195 | 190 | 180 | 171 | - | - | - | ≤ 0,09 | ≤ 1.0 | ≤ 1.0 | ≤ 0,04 | 0.03 | 14.0 16.0 | 6.5 7.75 | Mo:2.0-3.0Al: 0.75-1.5 | |||||
| baja X39CrMo 17-1 | -50 kanggo +400 | 1200-1400 | 215 | 212 | 205 | 200 | 190 | - | - | 0.33-0.45 | ≤ 1.0 | ≤ 1.5 | ≤ 0,04 | 0.03 | 15.5 17.5 | ≤ 1.0 | Mo:0.7-1.3 | |||||
| X 22CrMoV 12-1 | -50 kanggo +500 | 1200-1400 | 216 | 209 | 200 | 190 | 179 | 167 | - | 0.18-0.24 | ≤ 0,5 | 0.4 0.9 | ≤ 0,025 | 0.015 | 11 12.5 | 0.3-0.8 | V:0.25-0.35Mo:0.8-1.2 | |||||
| X30WCrV53 SKD4 | -50 kanggo +500 | ≥ 1470 | 216 | 209 | 200 | 190 | 179 | 167 | - | 0.25-0.35 | 0.15-0.30 | 0.20 0.40 | ≤ 0,035 | 0.035 | 2.2 2.5 | ≤ 0,35 | V:0.5-0.7 W: 4-5 | |||||
| X40CrMoV5-1 SKD61 | -150 kanggo +600 | 1650-1990 | 206 | 200 | 196 | 189 | 186 | 158 | - | 0.32 0.40 | 0.8 1.20 | 0.20 0.50 | ≤ 0,030 | 0.030 | 4.75 5.50 | V: 0.80-1.20Mo:1.1-.75 | ||||||
| nikel Inconel X750 Kab | -200 kanggo +600 | ≥ 1170 | 214 | 207 | 198 | 190 | 179 | 170 | 158 | ≤ 0,08 | ≤ 0,50 | ≤ 1.0 | ≤ 0,02 | 0.015 | 14.0 17.0 | ≥ 70 | Co≤ 1.0 Ti2.25-2.75 Fe 5.0-9.0 | |||||
| Inconel X718 Kab | -200 kanggo +600 | ≥ 1240 | 199 | 195 | 190 | 185 | 179 | 174 | 167 | 0.02 0.08 | ≤ 0,35 | ≤ 0,35 | ≤ 0,015 | 0.015 | 17.0 21.0 | 50.0 55.0 | V≤ 1.0Mo:0.70-1.15 | |||||
| Nimonic 90 | -200 kanggo +700 | ≥ 1100 | 220 | 216 | 208 | 202 | 193 | 187 | 178 | ≤ 0,13 | ≤ 1.0 | ≤ 1.0 | ≤ 0,03 | 0.015 | 18.0 21.0 | Bal | V15.0-21.0Mo:2.0-3.0 Al≤ 0.2 | |||||
♦♦♦ High Temperature Spring Bahan Fitur: ♦♦♦
♦ 304 stainless steel
304 stainless steel wis deformed dening karya kadhemen kanggo nambah sifat elastis sawijining.Iku ora bisa hardened dening perawatan panas.Bakal ngasilake magnet nalika kerja kadhemen.304 stainless steel wis resistance karat kuwat lan sifat fisik apik.
♦316 baja tahan karat
316 stainless steel wis deformed dening kadhemen digunakake kanggo nambah sifat lentur, lan ora bisa hardened dening perawatan panas.Bakal ngasilake magnet nalika kerja kadhemen.316 stainless steel ngandhut molybdenum, kang nduweni resistance karat kuwat saka 304 stainless steel, lan bisa nolak karat ing aplikasi kimia.
♦17-7PH (GH631, 0Cr17Ni7Al)
17-7PH resistance karat padha kanggo 304 stainless steel, kang bisa precipitated dening perawatan panas lan hardening udan.Wis dhuwur tensile lan kekuatan ngasilaken.Kinerja lemes luwih apik tinimbang baja tahan karat 304 lan baja karbon 65Mn.Uga nduweni elastisitas sing apik ing lingkungan ℃.
♦15-7Mo (GH632, 0Cr15Ni7Mo2Al)
15-7MoDuwe resistance karat padha kanggo 316 stainless steel.Bisa precipitated dening perawatan panas lan hardening udan.Wis dhuwur tensile lan kekuatan ngasilaken, lan kinerja lemes luwih saka 316 stainless steel lan 65Mn baja karbon.Uga nduweni elastisitas sing apik ing lingkungan ℃.
♦Inconel X-750 (GH4145)
Inconel X-750 minangka superalloy deformasi pengerasan presipitasi berbasis nikel.Utamane nggunakake r'phase minangka fase hardening presipitasi tuwa.Suhu sing disaranake ing ngisor 540 ℃.Wesi kasebut nduweni resistensi karat lan resistensi oksidasi tartamtu, lan nduweni kinerja suhu sing sithik.
♦Inconel 718 (GH4169)
Inconel 718 minangka superalloy deformasi pengerasan presipitasi berbasis nikel.Rentang suhu sing disaranake yaiku -253--600 ℃.Paduan kasebut nduweni kekuatan dhuwur ing ngisor 600 ° C, nduweni resistensi lemes sing apik, tahan radiasi, tahan oksidasi lan tahan korosi, uga kinerja pangolahan sing apik lan stabilitas struktur jangka panjang.
♦A-286 (GH2132, SUH660)
Alloy A-286 minangka wesi adhedhasar wesi hardening deformasi suhu dhuwur alloy.Suhu operasi sing disaranake ing ngisor 540 ℃.Paduan kasebut nduweni kekuatan suhu dhuwur lan kurang lan stabilitas jangka panjang, tahan korosi sing apik lan kinerja deformasi termal, lan nduweni plastisitas pangolahan sing apik lan kinerja welding sing puas.
